Volume 4

Czasopismo Techniczne

2018

Data publikacji: 27.04.2018

Licencja: Żadna

Redakcja

Redaktor naczelny Józef Gawlik

Zawartość numeru

Concepts of transformations of cities – examples from the Silesian Agglomeration

Rafał Blazy

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 5 - 22

https://doi.org/10.4467/2353737XCT.18.050.8362

The problem of functional, compositional, and structural transformations, necessary to be introduced in contemporary inner cities, is complex and multithreaded. Sometimes cities get compared to palimpsests – re-used parchments from which old texts were removed in order to replace them with new ones. Undoubtedly, they are very particular palimpsests, as it is very difficult to clearly assess what should be protected and preserved, and what can be replaced or reconstructed. This paper discusses problems and

concepts of transformations of selected city centres of the Silesian agglomeration, paying special attention to big comprehensive reconstructions of Katowice and Gliwice.

PDF

Forms, details and contemporary meanings of Polish concrete architecture, part 1

Marcin Charciarek

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 23 - 34

https://doi.org/10.4467/2353737XCT.18.051.8363

The article is an attempt to show the relationship between architectural ideas and concrete matter in the implementation of Polish architecture of the beginning of the 21st century. The first part shows examples in which the perfection of architecture is associated not only with the rational principles of 20th century architecture, but also with what we define as the search for aesthetics in appropriate expression of forms.

PDF

Forms, details and contemporary meanings of Polish concrete architecture, part 2

Marcin Charciarek

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 35 - 44

https://doi.org/10.4467/2353737XCT.18.052.8364

The article is an attempt to show the relationship between architectural ideas and concrete matter in the implementation of Polish architecture of the beginning of the 21st century. The second part shows examples in which the perfection of architecture is associated not only with the metaphor principles of 20th century architecture, but also with what we define as the search for aesthetics in appropriate geometry of forms.

PDF

Sight and insight – creating space for religious practices

Peter Gyori, Albert Fekete, Agnes Herczeg

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 45 - 54

https://doi.org/10.4467/2353737XCT.18.053.8365

The paper reviews some recent attempts that describe the meaning of dry gardens that can be found in Zen Buddhist monasteries in Japan. When researchers try to figure out the meaning of the visual elements, its structure or the placement of the stones, they usually stay on the level of understanding. However, the daily meditational practice among these walls near the dry garden provides a different point of view. The purpose of this study is to show the importance of attention regarding the daily use of dry gardens on the way to enlightenment.

PDF

Heavens above – a statue of Christ in the landscape

Magdalena Rzeszotarska-Pałka

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 55 - 68

https://doi.org/10.4467/2353737XCT.18.054.8366

The monuments of Christ erected from 1920s onwards in many places throughout the world are a specific group of dominants associated with sacrum. Their effect on the perception of the landscape is very strong because of the artistic form and, above all, the symbolic dimension they have. The aim of the work is to demonstrate that land development projects around sacred landscape dominants in the form of statues of Christ should be subject to careful consideration, both in terms of functionality and composition. The adjustment of the environment to the scale and rank of the object - so as to emphasise its special role in the landscape, but also the symbolism associated with the sphere of sacrum - plays a crucial role in this case. Comparative analyses were made for ten highest statues of Christ in the world. The research was also supplemented with a presentation of the concept of land development around the statue of Christ in Świebodzin.

PDF

Microspaces – an outline of typological research based on examples from Krakow

Dorota Wantuch-Matla

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 69 - 82

https://doi.org/10.4467/2353737XCT.18.055.8367

In the complex systems of urban spaces one can find many places, which, owing to their small scale, are often treated a part of a larger whole. Whereas their borders are often blurred, their character allow for establishing them as a typological identity. Various “microspaces” play a significant role, often hidden or only temporarily arranged within a specific segment of a city space as its supplement, complement, or simply to make it more attractive. Observation of the transformations taking place in the public spaces of Krakow allows not only for the indication of the fact that such places exist and are being created, it also enables us to frame a sketch of their functional and spatial polymorphism. This article elaborates on some chosen examples of Krakow microspaces and their variants.

PDF

Application of circulating fluidized bed boilers in the fuel combustion process

Krystian Leski, Przemysław Luty, Andrzej Łucki, Dawid Jankowski

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 83 - 96

https://doi.org/10.4467/2353737XCT.18.056.8368

The combustion of fuels plays an important role in the field of industry and power engineering. Nowadays, a lot is being done to reduce the industry's interference in the environment, due to ecological considerations. Not only is the fluid technology environmentally friendly, but also it is a convenient method of energy production from wide range of fuels. The article presents a summary of the most significant events in the history of fluidized bed boilers, there is also a description of construction and operation of a circulating fluidized bed boiler and its comparison with technologically similar bubbling fluidized bed boiler. The usage of diverse types of fuels is discussed and compared. Special emphasis is placed on the application of fluidized bed boilers in Polish industry.

PDF

An overview on obtaining foamed PET by reactive extrusion

Dominika Misiura, Tomasz M. Majka

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 97 - 102

https://doi.org/10.4467/2353737XCT.18.057.8369

Many methods are used to obtain functional polymer foams. This review focuses on reactive extrusion of poly(ethylene terephthalate). This process is based on the reaction between PET and the appropriate blowing agent. The next step is the creation of foam by closing gas cells in the polymer matrix. This method of modification allows material with higher molecular weight to be obtained and, therefore, higher melt strength. The use of different chemical modifiers and their concentration influences properties of created foam. The enhanced features of foamed PET allow it to be used in many areas of application such as transport, construction or general industry. Another big advantage of this technique is the possibility of using recycled materials as the source of PET.

PDF

An evolutionary model for the parametric optimisation of electromagnetic instruments of variable structures

Volodymyr Samotyy, Ulyana Dzelendzyak, Andrii Pavelchak

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 103 - 118

https://doi.org/10.4467/2353737XCT.18.058.8370

This paper discusses the principle of constructing an evolutionary model for the parametric optimisation of electromagnetic instruments with solid-state valves. To illustrate the method, a triple voltage scheme was selected – this converts variable voltage into constant voltage and at the same time, triples the amplitude. Valve operation was modelled according to the ideal key diagram; the considered resistance was that of an open valve.

PDF

The CORDIC method of calculating the exponential function

Leonid Moroz, Volodymyr Samotyy

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 119 - 126

https://doi.org/10.4467/2353737XCT.18.059.8371

This article presents a modern method of calculating the exponential function exp(x) based on the CORDIC iterative algorithm. The proposed solution is implemented in the form of a single iterative equation, which results in the simplification of the electronic version of this algorithm, thus reducing the cost of the device. It is important to point out that the accuracy of the calculation of the analysed function is not lost.

PDF

Energy efficient data center resources management using beam search algorithm

Sergii Telenyk, Oleksander Rolik, Eduard Zharikov, Yevhenii Serdiuk

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 127 - 138

https://doi.org/10.4467/2353737XCT.18.060.8372

Modern data centres consume large amounts of power resulting in high levels of carbon dioxide emission. The data centre is a virtual environment in which the workload is performed by virtual machines. A widely used technique to decrease data centre power consumption is to consolidate the virtual machines using a minimal number of physical servers. The authors propose a two-stage method to solve the virtual machine consolidation problem in cloud data centres. The proposed method is programmed in C# to evaluate it and to perform modelling using Google cluster-usage traces. The proposed method enables powering off nearly fifty percent of the previously selected physical servers by using an acceptable number of migrations of virtual machines.

PDF

An abstract nonlocal functional-differential second order evolution Cauchy problem

Adam Bednarz, Ludwik Byszewski

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 139 - 147

https://doi.org/10.4467/2353737XCT.18.062.8374

The aim of the paper is to prove two theorems on the existence and uniqueness of mild and classical solutions of a semilinear functional-differential evolution second order equation together with nonlocal initial conditions. The theory of strongly continuous cosine families of linear operators in a Banach space is applied. The paper is based on publications [1–12] and is a generalization of paper [7].

PDF

The mechanical characterization of composites based on polyoxymethylene and the effect of silicone addition on the mechanical behaviour of manufactured composites

Patrycja Bazan, Stanisław Kuciel

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 149 - 158

https://doi.org/10.4467/2353737XCT.18.063.8375

The mechanical properties of manufactured composites based on polyoxymethylene (Tarnoform 300) were determined. POM composites reinforced with ultra-high molecular weight silicon, thermoplastic polyurethane, and special chalk in order to reduce abrasiveness and aramid fibres were manufactured. The basic mechanical properties (tensile strength (σM), modulus of elasticity (Et), strain at break (εB), flexural modulus (Ef) and flexural stress at 3.5% strain (σs)) were evaluated at three temperatures -20, 20 and 80°C. The density and Charpy impact of the produced composites were examined. In order to make reference to the effects of reinforcement and determine the characteristics of their microstructure SEM, images were taken.

PDF

Selected aspects involved in the optimization of cranes with pivoting booms

Stefan Chwastek

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 159 - 171

https://doi.org/10.4467/2353737XCT.18.064.8376

Certain crane operations – hoisting/lowering the payload connected to a slewing jib – require a nonlinear description to take Euler and Coriolis forces into account, the impacts of which should already be minimised at the stage of selection of the system parameters and mechanism structure. Optimal sets of parameters for the crane mechanisms thus obtained were optimised for the full range of slewing motion. It is demonstrated that the selection of the geometric dimensions of the structural elements of the hoisting mechanisms, i.e. the slewing system and counterbalances, enables the horizontal track error load to be minimised whilst the forces acting on the mechanism and inducing its vertical movement can be reduced. Thus, for the assumed lifting capacity and distance jaunt we get the structure of the crane mechanism that guarantees the minimal consumption of energy.

PDF

The influence of a CrN+a-C:H:W coating on the development of fretting wear in a model of a wheel–axle press-fit joint on a wheel set of a railway vehicle

Sławomir Kowalski

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 173 - 187

https://doi.org/10.4467/2353737XCT.18.065.8377

The tests were conducted on a wheel/axle press-fit joint model, which consisted of a shaft and a sleeve. Macrographic observations were demonstrated fretting wear on the shaft surface with and without coatings. In the case of the uncoated shaft, wear around the entire circumference of the axle seat was visible in the form of a peculiar ring of a specific width. The coated shaft surface was distinguished by a considerably smaller number of visible traces of wear. Wear was observed around the entire circumference of the axle seat, was spaced at random, and insignificantly sized areas each time. Micrographic observations with the use of a scanning microscope demonstrated that fretting was primarily comprised of the build-up of the material from both surfaces joined together. In addition to the build-up, surface micro-abrasion, micropits and microcracks are observed, albeit to a lesser extent.

PDF

The use of genetic algorithm to optimize quantitative learner's motivation model

Paweł Lempa, Michal Ptaszynski, Fumito Masui

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 189 - 194

https://doi.org/10.4467/2353737XCT.18.066.8378

The paper presents a method of optimizing Quantitative Learner’s Motivation Model with the use of genetic algorithm. It is focused on optimizing the formula for prediction of learning motivation by means of different weights for three values: interest, usefulness in the future and satisfaction. For the purpose of this optimization, we developed a C++ library that implements a genetic algorithm and an application in C# which uses that library with data acquired from questionnaires enquiring about those three elements. The results of the experiment showed improvement in the estimation of student’s learning motivation.

PDF

Composites based on recycled polystyrene waste with tuff microparticles

Karolina Mazur, Stanisław Kuciel

Czasopismo Techniczne, Volume 4 Year 2018 (115), 2018, s. 195 - 203

https://doi.org/10.4467/2353737XCT.18.067.8379

Nowadays electric and electronic equipments are produced on a large scale, for example, personal computers. Therefore, more and more waste is recycled. To increase the strength properties of recycled materials, they are reinforced with various types of fillers such as natural. Over the last few years, fillers from tuffs of volcanic origin have been gaining in popularity. It is characterized by a low mass, high hardness, high matrix adhesion, which allow for uniform distribution of particles in the volume of the material. In this paper, composites based on recycled polystyrene waste with tuff microparticles in mass weight of 10% and 20% were produced by injection moulding. The basic mechanical properties at room temperature (+24°C) -24 and +80°C were evaluated. The aim of the study was to demonstrate the possibility of using the mineral filler particles as compatibilizer for

recycled polystyrene waste of poor quality.

PDF

Słowa kluczowe: Theory of urban design, concepts of reconstruction of cities, reconstruction of Silesian cities, reconstruction of Katowice, reconstruction of Gliwice, city centre revitalisation, future of cities, city forming, concrete architecture, idea, matter, expressionisme, concrete architecture, idea, matter, expressionisme, dry garden, Buddhism, Zen, practice, attention, landscape dominants, sacrum in the landscape, statue of Christ, public urban space, microspaces, urban design, fluidized bed, combustion, circulating fluidized bed boiler, CFB boiler, PET; Foams; Reactive extrusion, evolutionary model, parametric optimisation, ideal key, voltage tripler, fixed mode, additional logic variables, exponential function, hybrid CORDIC method, LUT lookup table, iterative equations, activation functions, cloud computing, virtualisation, virtual machine consolidation, local beam search, nonlocal, second order, functional-differential, evolution Cauchy problem, Banach spaces, polyformaldehyde, additives, modification of structure, properties, cranes, counterbalance, pivoting jib, slewing system, Euler's forces, Coriolis forces, energy consumption, nonlinear and non-stationary differential equations of motion, vibration, parametric optimisation, horizontal track error load, one-link jib crane, PVD coating, CrN+a-C:H:W, rotational bending, fretting wear, press-fit joint, wheel set, optimization, genetic algorithm, Quantitative Learner’s Motivation Model, mechanical properties, natural fillers, ecology, recycling