Efficient surfaces for boiling heat transfer enhancement
cytuj
pobierz pliki
RIS BIB ENDNOTEWybierz format
RIS BIB ENDNOTEEfficient surfaces for boiling heat transfer enhancement
Data publikacji: 19.12.2016
Czasopismo Techniczne, 2016, Mechanika Zeszyt 4-M 2016, s. 3 - 8
https://doi.org/10.4467/2353737XCT.16.224.5973Autorzy
Efficient surfaces for boiling heat transfer enhancement
The paper discusses the use of efficient surfaces for heat transfer enhancement during a nucleate boiling heat transfer. Distilled water under ambient pressure was the working fluid in the presented experiment. The application of a brass mesh of 0.63 mm aperture and 0.20 mm wire diameter on the surface of a copper heater led to considerable improvement in the value of heat flux at low temperature differences of a few Kelvin, where the enhancement ratio exceeded 2. Such modified surfaces could be used in the design of more efficient heatn exchangers e.g. in refrigeration systems.
Informacje: Czasopismo Techniczne, 2016, Mechanika Zeszyt 4-M 2016, s. 3 - 8
Typ artykułu: Oryginalny artykuł naukowy
Tytuły:
Efficient surfaces for boiling heat transfer enhancement
Efficient surfaces for boiling heat transfer enhancement
Kielce University of Technology, Faculty of Mechatronics and Mechanical Engineering
Chair of Sanitary Networks and Systems, Faculty of Environmental, Geomatic and Energy Engineering, Kielce University of Technology
Department of Power Engineering, Faculty of Mechanical Engineering, University of Žilina, Slovakia
Department of Technology Engineering, Faculty of Mechanical Engineering, University of Žilina, Slovakia
Publikacja: 19.12.2016
Status artykułu: Otwarte
Licencja: Żadna
Udział procentowy autorów:
Korekty artykułu:
-Języki publikacji:
AngielskiLiczba wyświetleń: 1675
Liczba pobrań: 995