The effect of the addition of boron on the densification, microstructure and properties of sintered 17-4 PH stainless steel
cytuj
pobierz pliki
RIS BIB ENDNOTEWybierz format
RIS BIB ENDNOTEThe effect of the addition of boron on the densification, microstructure and properties of sintered 17-4 PH stainless steel
Data publikacji: 13.10.2014
Czasopismo Techniczne, 2014, Mechanika Zeszyt 2-M (13) 2014, s. 85 - 96
https://doi.org/10.4467/2353737XCT.14.293.3381Autorzy
The effect of the addition of boron on the densification, microstructure and properties of sintered 17-4 PH stainless steel
It is generally known that boron is an effective activator of the sintering process of iron as well as stainless steels. During sintering, boron contributes to the formation of a liquid phase wetting the surfaces of powder particles. As a consequence, a reduction of porosity, the rounding of pores and an increase in density is obtained. It is necessary to improve mechanical properties and corrosion resistance. The aim of this study is to investigate the effect of the addition of boron in the amounts of 0.2, 0.4 and 0.6% wt. on the density, microstructure and selected properties of sintered 17-4 PH stainless steel.
Samal P.K., Nandivada N., Hauer I., Properties of 17-4PH Stainless Steel Produced via Press and Sinter Route, Advances in Powder Metallurgy & Particulate Materials, Part 7, 2008, 109-120.
Szewczyk-Nykiel A., Gądek S., Nykiel M., Kazior J., Właściwości spiekanych stali nierdzewnych utwardzonych wydzieleniowo, Rozdział w monografii Ed. Instytut Zaawansowanych Technologii, 2011, 445-458.
Schade Ch., Schaberl J., Lawley A., Stainless Steel AISI Grades for PM Applications, International Journal of Powder Metallurgy, 44(3), 2008, 57-67.
Rivolta B., Gerosa R., On the non-isothermal precipitation of copper-rich phase in 17-4 PH stainless steel using dilatometric techniques, Journal of Thermal Analysis and Calorimetry, 102, 2010, 857-862.
Schade Ch., Processing, Microstructures and Properties of a Dual Phase Precipitation- Hardening PM Stainless Steel, Berlin 2010.
Gülsoy H.Ö., Salman S., Özbek S., Effect of FeB additions on sintering characteristics of injection moulded 17-4PH stainless steel powder, Journal of Materials Science, 39, 2004, 4835-4840.
Gülsoy H. Ö., Salman S., Microstructures and mechanical properties of injection molded 17-4PH stainless steel powder with nickel boride additions, Journal of Materials Science, 40, 2005, 3415-3421.
Szewczyk-Nykiel A., Gądek S., Hebda M., Nykiel M., Kazior J., Badania zagęszczania proszku stali nierdzewnej 17-4 PH podczas spiekania w próżni i w wodorze, Inżynieria Materiałowa, 33(5), 2012, 469-472.
Gülsoy H.Ö., Salman S., Özbek S., Findik F., Sintering of a boron-doped injection moulded 17-4PH stainless steel, Journal of Materials Science, 40, 2005, 4101-4104.
Mutlu I., Oktay E., Processing and properties of highly porous 17-4 PH stainless steel, Powder Metallurgy and Metal Ceramics, 50(1-2), 2011, 73-82.
Mutlu I., Oktay E., Production and aging of highly porous 17-4 PH stainless steel, Journal of Porous Materials, 19, 2012, 433-440.
Murray K., Coleman A.J., Tingskog T.A., Whychell D.T., Effect of particle size distribution on processing and properties of MIM 17-4PH, International Journal of Powder Metallurgy 47(4), 2011, 21-28.
Karwan-Baczewska J., The Properties of Novel Sintered Materials base on Distaloy SA Powder with Carbon and Boron, Rudy i Metale Nieżelazne, 57(6), 2012, 404-409.
Dudrova E., Selecka M., Bures. S., Kabatova M., Effect of Boron Addition on Microstructure and Properties of Sintered Fe-1,5Mo, Powder Materials ISIJ International, 37(1), 1997, 59-64.
Karwan-Baczewska J., Właściwości nowych spiekanych stali molibdenowych modyfikowanych borem, Rudy i Metale Nieżelazne, 48(6), 2003, 279-284.
Bagliuk G., Properties and Structure of Sintered Boron Containing Carbon Steels, Sintering – Methods and Products, InTech China, 12, 2012, 249-266.
Akhtar F., Sintering Behavior of Elemental Powders with FeB Addition in the Composition of Martensitic Stainless Steel, Journal of Materials Engineering and Performance, 16, 2007, 726-729.
Cabral-Miramontes J.A., Barceinas-Sánchez J.D.O., Almeraya-Calderón F., Martinez- Villafaňe A., Chacón-Nava J.G., Effect of Boron Additions on Sintering and Densification of a Ferritic Stainless Steel, Journal of Materials Engineering and Performance, 19, 2010, 880-884.
Skałoń M., Kazior J., Enhanced sintering of austenitic stainless steel powder AISI 316L through boron containing master alloy addition, Archives of Metallurgy and Materials, 57(3), 2012, 789-797.
Yilmaz R., Ekici M.R., Microstructural and hardness characterization of sintered low alloyed steel, Journal of Achievements in Materials and Manufacturing Engineering, 31(1), 2008, 23-28.
Mahathanabodee S., Palathai T., Raadnui S., Tongsri R., Sombatsompop N., Effect of h-BN content on the sintering of SS316L/h-BN composites, Advanced Materials Research, 410, 2012, 216-219.
Gierl Ch., Mohsin I.U., Danninger H., Boron Activated Sintering of PM Steels – Alternative Boron Sources, Powder Metallurgy Progress, 8 (2), 2008, 135-141.
Lozada L., Castro F., Controlled densification of boron-containing stainless steels, Advances in Powder Metallurgy & Particulate Materials 2011, May 18–21, San Francisco, California.
Cabral-Miramontes J.A., Barceinas-Sánchez J.D.O., Poblano-Salas C.A., Pedraza- Basulto G.K., Nieves-Mendoza D., Zambrano-Robledo P.C., Almeraya-Calderón F., Chacón-Nava J.G., Corrosion Behavior of AISI 409Nb Stainless Steel Manufactured by Powder Metallurgy Exposed in H2SO4 and NaCl Solutions, International Journal of Electrochemical Science, 8, 2013, 564-577.
Kazior J., Pieczonka T., Influence of boron on the surface microstructure of sintered AISI 316L austenitic stainless steel, Inżynieria Materiałowa, 31(3), 2010, 487-490.
Karwan-Baczewska J., The Properties of Fe-Ni-Mo-Cu-B Materials Produced Via Liquid Phase Sintering, Archives of Metallurgy and Materials, 56(3), 2011, 789-796.
Tojal C., Gómez-Acebo T., Castro F., Development of PM Stainless Steels with Improved Properties through Liquid Phase Sintering, Materials Science Forum, 534-536, 2007, 661-664.
Becker B.S., Bolton J.D., Eagles A.M., Sintering of 316L stainless steels to high density via the addition of chromium diboride powders Part 1: Sintering performance and mechanical properties, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 214(3), 2000, 139-152.
Capus J., Seeking high strength in PM stainless steels, Metal Powder Report, 65(6), 2010, 30-35.
Informacje: Czasopismo Techniczne, 2014, Mechanika Zeszyt 2-M (13) 2014, s. 85 - 96
Typ artykułu: Oryginalny artykuł naukowy
Tytuły:
The effect of the addition of boron on the densification, microstructure and properties of sintered 17-4 PH stainless steel
The effect of the addition of boron on the densification, microstructure and properties of sintered 17-4 PH stainless steel
Instytut Inżynierii Materiałowej, Wydział Mechaniczny, Politechnika Krakowska
Publikacja: 13.10.2014
Status artykułu: Otwarte
Licencja: Żadna
Udział procentowy autorów:
Korekty artykułu:
-Języki publikacji:
AngielskiLiczba wyświetleń: 1891
Liczba pobrań: 2433