FAQ

Numerical modelling of coupled heat and water transport on embankment dam in Kozlowa Gora

Data publikacji: 19.12.2016

Czasopismo Techniczne, 2016, Środowisko 1-Ś (11) 2016, s. 117 - 126

https://doi.org/10.4467/2353737XCT.16.200.5949

Autorzy

,
Paweł Opaliński
Wszystkie publikacje autora →
,
Krzysztof Radzicki
Institute of Water Engineering and Water Management, Faculty of Environmental Engineering, Cracow University of Technology
Wszystkie publikacje autora →
Stephane Bonelli
National Research Institute of Science and Technology for Environment and Agriculture., France
Wszystkie publikacje autora →

Tytuły

Numerical modelling of coupled heat and water transport on embankment dam in Kozlowa Gora

Abstrakt

The paper discusses the use of the thermo-hydraulic numerical model to verify the hypothesis of subsoil seepage and erosion development in a section of the Kozłówa Góra dam. This dam is provided with an innovative and advanced system for quasi-3D thermal monitoring of seepage and erosion, which was used for temperature measurements. The herein reported analysis of the measurements showed high applicability of the thermal monitoring method in determining the severity of erosion and seepage processes using numerical modelling.

Bibliografia


Informacje

Informacje: Czasopismo Techniczne, 2016, Środowisko 1-Ś (11) 2016, s. 117 - 126

Typ artykułu: Oryginalny artykuł naukowy

Tytuły:

Polski:

Numerical modelling of coupled heat and water transport on embankment dam in Kozlowa Gora

Angielski:

Numerical modelling of coupled heat and water transport on embankment dam in Kozlowa Gora

Autorzy

Institute of Water Engineering and Water Management, Faculty of Environmental Engineering, Cracow University of Technology

National Research Institute of Science and Technology for Environment and Agriculture., France

Publikacja: 19.12.2016

Status artykułu: Otwarte __T_UNLOCK

Licencja: Żadna

Udział procentowy autorów:

Paweł Opaliński (Autor) - 33%
Krzysztof Radzicki (Autor) - 33%
Stephane Bonelli (Autor) - 34%

Korekty artykułu:

-

Języki publikacji:

Angielski