Numerical computation of stresses and deformations in the planetary
roller screw components
cytuj
pobierz pliki
RIS BIB ENDNOTEWybierz format
RIS BIB ENDNOTE
Numerical computation of stresses and deformations in the planetary
roller screw components
Data publikacji: 13.01.2016
Czasopismo Techniczne, 2015, Mechanika Zeszyt 2-M (7) 2015, s. 141 - 148
Autorzy
Numerical computation of stresses and deformations in the planetary
roller screw components
The paper presents finite element analysis of stresses and deformations of planetary roller screw components. The finite element model takes into account the frictional contact between helical surfaces. The results of numerical calculations for the contact problem were compared with the theoretical solution based on the Hertz theory. The obtained results can be used in the development of design procedures of planetary roller screw.
[1] Cooper D.H., Tables of Hertzian contact-stress coefficients, University of Illinois, Report R-387, 1968.
[2] Lisowski F., The Analysis of displacements and the load distribution between elements in a Planetary Roller Screw, Applied Mechanics and Materials, Vol. 86, 2014, 361-364.
[3] Lisowski F., Procedura wstępnego projektowania planetarnej przekładni śrubowej rolkowej z przekładnia zębatą, Przegląd Mechaniczny, 4/2014, 39-49.
[4] Ma S., Liu G., Zhou J., Tong R., Optimal design and contact analysis for Planetary Roller Screw, Applied Mechanics and Materials, Vol. 86, 2012, 361-364.
[5] Ryś J., Lisowski F., The computational model of the load distribution between elements in a planetary roller screw, Journal of Theoretical and Applied Mechanics, Vol. 52, No. 3, 2014.
[6] Romanowicz P., Szybiński B., Analytical and numerical assessment of fatigue properties in rolling bearings, 4th International Conference on Integrity, Reliability & Failure, 2013.
[7] Timoshenko S., Goodier J.N., Teoria sprężystości, McGraw-Hill Book Company, 1951.
[8] Zhang X., Liu G., Ma S., Tong R., Luo H., Study on axial contact deformation of planetary roller screw, Applied Mechanics and Materials, Vol. 155–156, 2012, 779-783.
Informacje: Czasopismo Techniczne, 2015, Mechanika Zeszyt 2-M (7) 2015, s. 141 - 148
Typ artykułu: Oryginalny artykuł naukowy
Tytuły:
Numerical computation of stresses and deformations in the planetary
roller screw components
Numerical computation of stresses and deformations in the planetary
roller screw components
Institute of Applied Informatics, Faculty of Mechanical Engineering, Cracow University of Technology
Publikacja: 13.01.2016
Status artykułu: Otwarte
Licencja: Żadna
Udział procentowy autorów:
Korekty artykułu:
-Języki publikacji:
AngielskiLiczba wyświetleń: 1666
Liczba pobrań: 1266