FAQ

Nonlinear static analysis of air cushion in SolidWorks Simulation 2016

Data publikacji: 22.02.2018

Czasopismo Techniczne, 2018, Volume 2 Year 2018 (115), s. 211 - 218

https://doi.org/10.4467/2353737XCT.18.030.8003

Autorzy

,
Dominik Kwiatkowski
Institute of Applied Informatics, Faculty of Mechanical Engineering, Cracow University of Technology
Wszystkie publikacje autora →
Edward Lisowski
Institute of Applied Informatics, Faculty of Mechanical Engineering, Cracow University of Technology
Wszystkie publikacje autora →

Tytuły

Nonlinear static analysis of air cushion in SolidWorks Simulation 2016

Abstrakt

The paper presents the results of research for load lifting process for a single pneumatic cushion. The load lifting process has been simulated in SolidWorks Simulation using the model of Mooney-Rivlin for hyperelastic material. Research was conducted based on a simplified 3D model and drawn up a mathematical model of pneumatic cushions determining of non-linear static characteristics for the lifting height depending on the weight of the load and supply pressure. The results compare with the results of laboratory tests conducted for the platform equipped with four air cushions.

Bibliografia

[1] Lisowski E., Filo G., Automated heavy load lifting and moving system using pneumatic cushions, Automation in Construction, Vol. 50, 2015, 91–101.
[2] I-Shih L., A note on the Mooney-Rivlin material model, Continuum Mechanics and Thermodynamics, Vol. 24, 2012, 583–590.
[3] Jaszak P., Modelowanie gumy za pomocą metody elementów skończonych, Elastomery, Vol. 20, No. 3 , 2016, 31–39.
[4] http://help.solidworks.com, Mooney-Rivlin hiper-elastic model.
[5] http://help.solidworks.com, Contact between elements.
 

Informacje

Informacje: Czasopismo Techniczne, 2018, Volume 2 Year 2018 (115), s. 211 - 218

Typ artykułu: Oryginalny artykuł naukowy

Tytuły:

Polski:

Nonlinear static analysis of air cushion in SolidWorks Simulation 2016

Angielski:

Nonlinear static analysis of air cushion in SolidWorks Simulation 2016

Autorzy

Institute of Applied Informatics, Faculty of Mechanical Engineering, Cracow University of Technology

Institute of Applied Informatics, Faculty of Mechanical Engineering, Cracow University of Technology

Publikacja: 22.02.2018

Status artykułu: Otwarte __T_UNLOCK

Licencja: Żadna

Udział procentowy autorów:

Dominik Kwiatkowski (Autor) - 50%
Edward Lisowski (Autor) - 50%

Korekty artykułu:

-

Języki publikacji:

Angielski