Uild up edge phenomenon and chip forms in inconel 625 alloy longitudinal turning – case study
cytuj
pobierz pliki
RIS BIB ENDNOTEWybierz format
RIS BIB ENDNOTEUild up edge phenomenon and chip forms in inconel 625 alloy longitudinal turning – case study
Data publikacji: 19.12.2016
Czasopismo Techniczne, 2016, Mechanika Zeszyt 5-M (15) 2016, s. 103 - 112
https://doi.org/10.4467/2353737XCT.16.289.6121Autorzy
Uild up edge phenomenon and chip forms in inconel 625 alloy longitudinal turning – case study
The paper presents the wear process of a carbide insert in Inconel 625 longitudinal turning as well as examples of chip forms. Inconel 625 alloy belongs to the difficult-to-cut material group and causes many problems in machining operations in industry. A major one concerns chip forms produced in turning operations and quick wear of the cutting edge. The conveyed research also revealed the Build Up Edge (BUE) phenomenon, which took place in conveyed tests. A few examples have been presented and analyzed.
Informacje: Czasopismo Techniczne, 2016, Mechanika Zeszyt 5-M (15) 2016, s. 103 - 112
Typ artykułu: Oryginalny artykuł naukowy
Tytuły:
Uild up edge phenomenon and chip forms in inconel 625 alloy longitudinal turning – case study
Uild up edge phenomenon and chip forms in inconel 625 alloy longitudinal turning – case study
Institute of Production Engineering, Faculty of Mechanical Engineering, Cracow University of Technology
Publikacja: 19.12.2016
Status artykułu: Otwarte
Licencja: Żadna
Udział procentowy autorów:
Korekty artykułu:
-Języki publikacji:
AngielskiLiczba wyświetleń: 1210
Liczba pobrań: 2046