FAQ

The use of linear guides to move HEAVY loads

Data publikacji: 13.01.2016

Czasopismo Techniczne, 2015, Mechanika Zeszyt 2-M (7) 2015, s. 83 - 89

Autorzy

Grzegorz Filo
Institute of Applied Informatics, Faculty of Mechanical Engineering, Cracow University of Technology
Wszystkie publikacje autora →

Tytuły

The use of linear guides to move HEAVY loads

Abstrakt

The paper presents results of laboratory tests of linear guides in the application to move heavy loads. The first phase of the work included construction of a test bench in the form of a steel frame running on profiled rails using HIWIN type blocks. Subsequently, investigations involving movement of the frame with various loads were performed. In each case a driving force of an operator was measured. Based on the obtained results, average values of the resistance to motion coefficients were estimated.

Bibliografia

[1] HIWIN, Assembly instructions linear guideways, Motion Control & Systems Catalogue, HIWIN GmbH, Germany, 2014.

[2] Bosch Rexroth, Online Catalog Linear Motion Technology, Bosch Rexroth AG, Lohr am Main, Germany, 2014.

[3] Majda P., Modeling of geometric errors of linear guideway and their influence on joint kinematic error in machine tools, Precision Engineering, Vol. 36, Issue 3, July 2012, 369-378.

[4] Zhu L.-J., Li L., Liu J.-H., Zhang Z.-H., A method for measuring the guideway straightness error based on polarized interference principle, International Journal of Machine Tools and Manufacture, Vol. 49, Issues 3–4, March 2009, 285-290.

[5] Brecher C., Utsch P., Klar R., Wenzel C., Compact design for high precision machine tools, International Journal of Machine Tools & Manufacture, Vol. 50, Issue 4, April 2010, 328-334.

[6] Rahman M., Mansur M.A., Lee L.K., Lum J.K., Development of a polymer impregnated concrete damping carriage for linear guideways for machine tools, International Journal of Machine Tools and Manufacture, Vol. 41, Issue 3, February 2001, 431-441.

[7] Lai J.-M., Liao J.-S., Chieng W.-H., Modeling and analysis of nonlinear guideway for double-ball bar (DBB) measurement and diagnosis, International Journal of Machine Tools and Manufacture, Vol. 37, Issue 5, May 1997, 687-707.

Informacje

Informacje: Czasopismo Techniczne, 2015, Mechanika Zeszyt 2-M (7) 2015, s. 83 - 89

Typ artykułu: Oryginalny artykuł naukowy

Tytuły:

Polski:

The use of linear guides to move HEAVY loads

Angielski:

The use of linear guides to move HEAVY loads

Autorzy

Institute of Applied Informatics, Faculty of Mechanical Engineering, Cracow University of Technology

Publikacja: 13.01.2016

Status artykułu: Otwarte __T_UNLOCK

Licencja: Żadna

Udział procentowy autorów:

Grzegorz Filo (Autor) - 100%

Korekty artykułu:

-

Języki publikacji:

Angielski

Liczba wyświetleń: 1561

Liczba pobrań: 1040