The role of the CFD modelling in the shape optimization
of the pressure pulsations dampers
cytuj
pobierz pliki
RIS BIB ENDNOTEWybierz format
RIS BIB ENDNOTE
The role of the CFD modelling in the shape optimization
of the pressure pulsations dampers
Data publikacji: 13.01.2016
Czasopismo Techniczne, 2015, Mechanika Zeszyt 2-M (7) 2015, s. 11 - 18
Autorzy
The role of the CFD modelling in the shape optimization
of the pressure pulsations dampers
Pressure pulsations in volumetric compressors systems have an important influence on the compression power and reliability. This problem occurs not only in huge compressor systems, as in the natural gas piping, in gas mines or national transport systems, but also in a small refrigeration compressors in domestic applications. Nowadays, it is necessary to develop pressure pulsation damping elements which will be effective for different mass flow rate values. One of the solutions are passive damping elements in the form of various types of nozzles. In addition to the decrease of pressure pulsations value, the result is also an increase in power consumption of the compression. Therefore, shape optimization is necessary. In the article the possibility of optimizing the shape of such elements using computational simulations is discussed.
[1] Cyklis P., Identyfikacja termodynamiczna elementów instalacji sprężarek wyporowych. Uogólnienie modelu Helmholtza, Monography, nr 254, Wydawnictwo Politechniki Krakowskiej, Kraków 1999.
[2] Ma Y.-C., Min O.-K., Pressure calculation in a compressor cylinder by a modified new Helmholtz modeling, Journal of Sound and Vibration 243, 2001, 775-796.
[3] Lee, S-H., Ih, J-G., Effect of non-uniform perforation in the long concentric resonator on transmission loss and back pressure, Journal of Sound and Vibration 311, 2008, 280-296.
[4] Hermann J., Koreck J., Maess M., Gaul L., von Estroff O., Frequency-dependent damping model for the hydroacoustic finite element analysis of fluid-filled pipes with diameter changes, Mechanical Systems and Signal Processing 25, 2011, 981-990.
[5] Sadamoto A., Tsubakishita Y., Murakami Y., Sound attenuation in circular duct using slit-like short expansion of eccentric and/or serialized configuration, Journal of Sound and Vibration 277, 2004, 987-1003.
[6] Shademan Y., Barron M., Balachandar R., CFD Study of effects of geometry variations on flow in a nozzle, Engineering Applications of Computational Fluid Mechanics, Vol. 6, No. 3, 2012, 412-425.
[7] Torregosa A., Fajardo P., Gil A., Navarro R., Development of non-reflecting boundary condition for application in 3D computational fluid dynamics, Engineering Applications of Computational Fluid Mechanics, Vol. 6, No. 3, 2005, 447-460.
[8] Sekavcnik M., Ogorevc T., Skerget L., CFD analysis of the dynamic behaviour of a pipe system, Forsh Ingenieurwes 70, 2012, 139-144.
[9] Engineering toolbox, http://www.engineeringtoolbox.com/darcy-weisbach-equationd_ 646.html (date of access: 2014-11-21).
Informacje: Czasopismo Techniczne, 2015, Mechanika Zeszyt 2-M (7) 2015, s. 11 - 18
Typ artykułu: Oryginalny artykuł naukowy
Tytuły:
The role of the CFD modelling in the shape optimization
of the pressure pulsations dampers
The role of the CFD modelling in the shape optimization
of the pressure pulsations dampers
Faculty of Mechanical Engineering, Cracow University of Technology
Institute of Thermal and Process Engineering, Faculty of Mechanical Engineering, Cracow University of Technology
Publikacja: 13.01.2016
Status artykułu: Otwarte
Licencja: Żadna
Udział procentowy autorów:
Korekty artykułu:
-Języki publikacji:
AngielskiLiczba wyświetleń: 1764
Liczba pobrań: 1196