FAQ

Stress–strain characteristics of brick masonry under compressive
cyclic loading

Data publikacji: 14.03.2016

Czasopismo Techniczne, 2015, Budownictwo Zeszyt 3-B (23) 2015, s. 57-68

https://doi.org/10.4467/2353737XCT.15.162.4337

Autorzy

,
Iwona Galman
Department of Structural Engineering, Faculty of Civil Engineering, Silesian University of Technology
Wszystkie publikacje autora →
Jan Kubica
Department of Structural Engineering, Faculty of Civil Engineering, Silesian University of Technology
Wszystkie publikacje autora →

Pobierz pełny tekst

Tytuły

Stress–strain characteristics of brick masonry under compressive
cyclic loading

Abstrakt

This paper presents the results of laboratory experiments carried out on twelve clay brick masonry wallettes of two types under cyclic compressive loading. In the paper, the procedure adapted for testing is described and the results are discussed. The failure models and cracking patterns of the tested specimens are presented. The effects of the repeated load on the behaviour and mechanical properties of the wall are observed and discussed. Based on the results, the analytical formula for the determination of the failure envelope curve is also proposed.

Bibliografia

[1] Kaushik H., Rai D., Jain S., Stress-Strain Characteristics of Clay Brick Masonry under Uniaxial Compression, Journal of Materials in Civil Engineering, ASCE, Vol. 19, No. 9, 2007, 728–739.

[2] Karsan J., Jersa J., Behavior of Concrete Under Compressive Loading, Journal of Structural Division, ASCE, Vol. 95, No. 12, 1969, 2543–2563.

[3] Naraie K., Sinha S., Behaviour of Brick Masonry Under Cyclic Compressive Loading, Journal of Construction Engineering and Management, 1989, 1432–1445.

[4] Chaubey U., Sinha S., Cyclic compressive loading response of brick masonry, Journal of Masonry International, Vol. 4, No. 3, 1991, 94–98.

[5] Alshebani M., Sinha S., Stress- Strain Characteristics of Brick Masonry Under Uniaxial Cyclic Loading, Journal of Structural Engineering, Vol. 125, No. 6, 1999, 600–604.

[6] Nazar M., Sinha S., Mathematical model for loading/unloading stress-strain curves of interlocking brick masonry, Proc. 7th International Masonry Conference, London 2006.

[7] Alshebani M., Permissible Stress Level of Brick Masonry under Compressive Cyclic Loading, Journal of Civil Engineering and Architecture, Vol. 7, 2013, 153–157.

[8] Narin K., Sinha S., Loading and Unloading Stress-Strain Curves for Brick Masonry, Journal of Structural Engineering, 1989, 2631–2644.

[9] Alshebani M, Sinha S., Cyclic compressive loading unloading curves of brick masonry, Structural Engineering and Mechanics, 1999, 375–382.

[10] Senthivel R., Sinha S., Behaviour of Calcium Silicate Brick Masonry Under Cyclic Uniaxial Compression. Masonry, Proc. 6th International Masonry Conference, Vol. 9, London 2002, 412–422.

[11] EN 1052-1:2001 Methods of test for Masonry – Part 1:Determination of compressive strength.

Informacje

Informacje: Czasopismo Techniczne, 2015, Budownictwo Zeszyt 3-B (23) 2015, s. 57-68

Typ artykułu: Oryginalny artykuł naukowy

Tytuły:

Polski:

Stress–strain characteristics of brick masonry under compressive
cyclic loading

Angielski:

Stress–strain characteristics of brick masonry under compressive
cyclic loading

Autorzy

Department of Structural Engineering, Faculty of Civil Engineering, Silesian University of Technology

Department of Structural Engineering, Faculty of Civil Engineering, Silesian University of Technology

Publikacja: 14.03.2016

Status artykułu: Otwarte __T_UNLOCK

Licencja: Żadna

Udział procentowy autorów:

Iwona Galman (Autor) - 50%
Jan Kubica (Autor) - 50%

Korekty artykułu:

-

Języki publikacji:

Angielski

Stress–strain characteristics of brick masonry under compressive
cyclic loading

cytuj

Pobierz PDF Pobierz

pobierz pliki

RIS BIB ENDNOTE