Wind tunnel tests of wind velocity around box-shape solids with respect to possible favourable placement of wind turbines
cytuj
pobierz pliki
RIS BIB ENDNOTEChoose format
RIS BIB ENDNOTEWind tunnel tests of wind velocity around box-shape solids with respect to possible favourable placement of wind turbines
Publication date: 14.12.2016
Technical Transactions, 2016, Civil Engineering Issue 2-B 2016, pp. 81 - 91
https://doi.org/10.4467/2353737XCT.16.160.5771Authors
Wind tunnel tests of wind velocity around box-shape solids with respect to possible favourable placement of wind turbines
The paper presents a set of wind tunnel tests performed for four box-shape solids. The tests were performed in a wind tunnel with a modelled boundary layer. The main objective of the research was to determine the mean wind velocity and turbulence at selected points. Potential placement of wind turbines is considered for those points. The paper includes a description of measurement, tests results and analysis of the results. Conclusions contain determination of necessary conditions for the best setup.
Information: Technical Transactions, 2016, Civil Engineering Issue 2-B 2016, pp. 81 - 91
Article type: Original article
Titles:
Wind tunnel tests of wind velocity around box-shape solids with respect to possible favourable placement of wind turbines
Wind tunnel tests of wind velocity around box-shape solids with respect to possible favourable placement of wind turbines
Institute of Structural Mechanics, Cracow University of Technology
Wind Engineering Laboratory, Faculty of Civil Engineering, Cracow University of Technology
Institute of Structural Mechanics, Cracow University of Technology
Institute of Structural Mechanics, Cracow University of Technology
Published at: 14.12.2016
Article status: Open
Licence: None
Percentage share of authors:
Article corrections:
-Publication languages:
EnglishView count: 1576
Number of downloads: 954