Analysis of energy-saving structures of
electric machines for domestic drive
cytuj
pobierz pliki
RIS BIB ENDNOTEChoose format
RIS BIB ENDNOTE
Analysis of energy-saving structures of
electric machines for domestic drive
Publication date: 29.12.2016
Technical Transactions, 2016, Electronical Engineering Issue 3-E 2016, pp. 163 - 171
https://doi.org/10.4467/2353737XCT.16.274.6073Authors
Analysis of energy-saving structures of
electric machines for domestic drive
In the paper, alternative technologies of electric machines for domestic appliances were discussed. Nowadays, domestic appliances are used on a mass scale. In most households, there are domestic appliances where electric machines are used. Commutator motors are generally used in domestic appliances due to low costs of production. This is one of their few advantages, whereas to their disadvantages can include low energy efficiency and durability, which is limited by the sliding contact of brush-commutator. In consequence, devices equipped with these motors have low efficiency of energy conversion and are very often unreliable. In recent years, the vacuum cleaner became the receiver of relatively high power from the mains. Therefore, vacuum cleaners were covered by EU regulations. An increase of the energy efficiency of domestic appliances where electric machines are used is possible, among others, by introducing energy- saving technologies in electric machines. They are characterized not only by higher energy efficiency, but also by much longer failure-free operation of domestic appliance drive.
Information: Technical Transactions, 2016, Electronical Engineering Issue 3-E 2016, pp. 163 - 171
Article type: Original article
Titles:
Analysis of energy-saving structures of
electric machines for domestic drive
Analysis of energy-saving structures of
electric machines for domestic drive
Faculty of Electrical and Computer Engineering, Rzeszow University of Technology
Department of Electrodynamics and Electrical Machine Systems, Faculty of Electrical and Computer Engineering, Rzeszow University of Technology
Faculty of Electrical and Computer Engineering, Rzeszow University of Technology
Published at: 29.12.2016
Article status: Open
Licence: None
Percentage share of authors:
Article corrections:
-Publication languages:
EnglishView count: 1453
Number of downloads: 905