FAQ

Wear of working part of surgical drills

Data publikacji: 13.12.2016

Czasopismo Techniczne, 2016, Mechanika Zeszyt 3-M (10) 2016, s. 99 - 104

https://doi.org/10.4467/2353737XCT.16.127.5738

Autorzy

Monika Gwoździk
Institute of Materials Engineering, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology
Wszystkie publikacje autora →

Tytuły

Wear of working part of surgical drills

Abstrakt

The paper presents the results ofstudies onthe topography of surgical borers flank after their operation. The studies were carried out on borers made of X39Cr13 martensitic steel, which was subject to heat and surface (plasma nitriding) treatment. Test drilling was performed in beef bones, which were fixed in a vice to ensure appropriate stability, a borer 6 mm in diameter and 160 mm long was used. The studies on the topography of flank comprised studies on roughness, which were carried out by means of a profilographometer designed for 2D and 3D studies on the surface by means of a contact method. The studies were carried out for borers of flank formed by successive drilling cycles

Bibliografia


Informacje

Informacje: Czasopismo Techniczne, 2016, Mechanika Zeszyt 3-M (10) 2016, s. 99 - 104

Typ artykułu: Oryginalny artykuł naukowy

Tytuły:

Polski:

Wear of working part of surgical drills

Angielski:

Wear of working part of surgical drills

Autorzy

Institute of Materials Engineering, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology

Publikacja: 13.12.2016

Status artykułu: Otwarte __T_UNLOCK

Licencja: Żadna

Udział procentowy autorów:

Monika Gwoździk (Autor) - 100%

Korekty artykułu:

-

Języki publikacji:

Angielski

Liczba wyświetleń: 1303

Liczba pobrań: 864

<p> Wear of working part of surgical drills</p>