The effect of degree of deformation on forward slip in experimental research on cold longitudinal rolling of flat bars made from en aw-6063 aluminium alloy
cytuj
pobierz pliki
RIS BIB ENDNOTEWybierz format
RIS BIB ENDNOTEThe effect of degree of deformation on forward slip in experimental research on cold longitudinal rolling of flat bars made from en aw-6063 aluminium alloy
Data publikacji: 20.12.2018
Czasopismo Techniczne, 2018, Volume 12 Year 2018 (115), s. 185 - 192
https://doi.org/10.4467/2353737XCT.18.192.9680Autorzy
The effect of degree of deformation on forward slip in experimental research on cold longitudinal rolling of flat bars made from en aw-6063 aluminium alloy
The paper presents experimental results that concern cold longitudinal rolling of flat bars made from EN AW-6063 aluminium alloy. The investigations aimed at determining the impact of the degree of deformation of material on the forward slip. The forward slips were calculated from Fink’s, Drezden’s and Vinogradov’s formulae. On the basis of investigations of the cold longitudinal rolling of flat bars made from aluminium EN AW-6063, it was found that the forward slip increases with an increase in degree of deformation of material.
[1] Wusatowski Z., Fundamentals of rolling, Śląsk, Katowice 1969.
[2] Lange K., Handbook of metal forming, McGraw-Hill Book Company, 1985.
[3] Morawiecki M., Sadok L., Wosiek E., Przeróbka plastyczna. Podstawy teoretyczne. Wydawnictwo Śląskie, Katowice 1977.
[4] Sińczak J. et al., Procesy przeróbki plastycznej– ćwiczenia laboratoryjne. Podstawy teoretyczne i wykonawstwo ćwiczeń. AKAPIT, Kraków 2001.
[5] Engler O., Schäfer C., et al., Flexible rolling of aluminium alloy sheet—Process optimization and control of materials properties, Journal of Materials Processing Technology, Vol. 229, 2016, 139–148.
[6] Gjønnes, L., Andersson B., Mechanisms of surface deformation during cold rolling of aluminium, Journal of Materials Science, Vol. 33, 1998, 2469–2476.
[7] Ściężor W., Mamala A., Kwaśniewski P., Analysis of properties of selected aluminium alloys, obtained by twin roll casting method and subjected to cold rolling process, Key Engineering Materials, Vol. 641, 2015, 202–209.
[8] Grydin O., Bondarenko S., Stolbchenko M., et al., Rollingof flat Aluminum strips with tailored mechanical properties, Materials Science Forum, Vol. 854, 2016, 87–92.
[9] Hirsch J., Aluminium in innovative light-weight car design, Materials Transactions, Vol. 52, 2011, 818–824.
[10] Davis J.R., Aluminum and Aluminum Alloys, ASM Specialty Handbook, ASM International, Ohio 1993.
[11] EN 573-3:2013 Skład chemiczny i rodzaje wyrobów przerobionych plastycznie. Cz. 3 Skład chemiczny i rodzaje wyrobów.
Informacje: Czasopismo Techniczne, 2018, Volume 12 Year 2018 (115), s. 185 - 192
Typ artykułu: Oryginalny artykuł naukowy
Tytuły:
The effect of degree of deformation on forward slip in experimental research on cold longitudinal rolling of flat bars made from en aw-6063 aluminium alloy
The effect of degree of deformation on forward slip in experimental research on cold longitudinal rolling of flat bars made from en aw-6063 aluminium alloy
Department of Metal Science and Materials Technologies, Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology
Publikacja: 20.12.2018
Status artykułu: Otwarte
Licencja: Żadna
Udział procentowy autorów:
Korekty artykułu:
-Języki publikacji:
AngielskiLiczba wyświetleń: 1243
Liczba pobrań: 1177