Comparison of the rheological properties of polyamide-6 and its nanocomposites with montmorillonite obtained by melt intercalation
cytuj
pobierz pliki
RIS BIB ENDNOTEWybierz format
RIS BIB ENDNOTEComparison of the rheological properties of polyamide-6 and its nanocomposites with montmorillonite obtained by melt intercalation
Data publikacji: 12.09.2014
Czasopismo Techniczne, 2013, Chemia Zeszyt 1-Ch (1) 2013, s. 39 - 46
https://doi.org/10.4467/2353737XCT.14.037.2620Autorzy
Comparison of the rheological properties of polyamide-6 and its nanocomposites with montmorillonite obtained by melt intercalation
Each varying parameter which can contribute to the quality of final products plays an important role in the processing of polymer nanomaterials. Rheological properties are useful in proper formulation of new polyamide-6 (PA-6) based materials and selecting processing parameters. However, the measured rheological properties depend strongly on the sample preparation method, humidity regulation, and time-temperature history during the measurement and not least on the kind of rheometer being used. The results of the preliminary investigation show the changes in visco-elastic properties of two types of PA-6 and their nanocomposites with montmorilonite.
N e v a l a i n e n K., H i n t z e C., S u i h k o n e n R, E t e l ä a h o P., Vu o r i n e n J, J ä r v e l ä P., I s o m ä k i N., Rheological properties of melt-compounded and diluted nanocomposites of atomic-layer-deposition-coated polyamide particles, Annual Transactions of The Nordic Rheology Society, 2008, 16, 1-9.
C h o w W.S., I s h a k Z.A.M., K a r g e r - K o c s i s J., Morphological and Rheological Properties of Polyamide 6/Poly(propylene)/Organoclay Nanocomposites, Macromolecules Material Eng., 2005, 290, 122-127.
C h o w W.S., I s h a k Z.A.M., I s h i a k u U.S., K a r g e r - K o c s i s J., A p o s t o l o v A.A., The effect of organoclay on the mechanical properties and morphology of injection-molded polyamide 6/polypropylene nanocomposites, Journal of Applied Polymer Science, 2004, 91, 175-189.
K i m J.H., C r e a s y T.S., Measurement of Sintering Characteristics of Clay-Reinforced Polyamide 6 Nanocomposite, Polymer Testing, 2004, 23, 629-636.
M a j k a T.M., P i e l i c h o w s k i K, Degradacja termiczna nanokompozytów poliamid/krzemian warstwowy, Czasopismo Techniczne, 2011, 20, 133-142.
G o n z a ´ l e z I., E g u i a z a ´ b a l J.I., N a z a ´ b a l J., Rubber-toughened polyamide 6/clay nanocomposites, Composites Science and Technology, 2006, 66, 1833-1843.
Wu D., Z h o u C., H o n g Z., M a o D., B i a n Z., Study on rheological behaviour of poly(butylene terephthalate)/montmorillonite nanocomposites, European Polymer Journal, 2005, 41, 2199-2207.
Informacje: Czasopismo Techniczne, 2013, Chemia Zeszyt 1-Ch (1) 2013, s. 39 - 46
Typ artykułu: Oryginalny artykuł naukowy
Tytuły:
Comparison of the rheological properties of polyamide-6 and its nanocomposites with montmorillonite obtained by melt intercalation
Comparison of the rheological properties of polyamide-6 and its nanocomposites with montmorillonite obtained by melt intercalation
Katedra Chemii i Technologii Polimerów, Wydział Inżynierii i Technologii Chemicznej, Politechnika Krakowska, Warszawska 24, 31-155 Kraków, Poland
Katedra Chemii i Technologii Polimerów, Wydział Inżynierii i Technologii Chemicznej, Politechnika Krakowska, Warszawska 24, 31-155 Kraków, Poland
Katedra Chemii i Technologii Polimerów, Wydział Inżynierii i Technologii Chemicznej, Politechnika Krakowska, Warszawska 24, 31-155 Kraków, Poland
Publikacja: 12.09.2014
Status artykułu: Otwarte
Licencja: Żadna
Udział procentowy autorów:
Korekty artykułu:
-Języki publikacji:
AngielskiLiczba wyświetleń: 2063
Liczba pobrań: 2056