FAQ

CFD modelling and analytical calculations of thermal transmittance
of multi-layer glazing with ultrathin internal glass partitions

Data publikacji: 13.10.2014

Czasopismo Techniczne, 2014, Budownictwo Zeszyt 3-B (8) 2014, s. 265 - 272

https://doi.org/10.4467/2353737XCT.14.246.3334

Autorzy

,
Agnieszka Lechowska
Department of Environmental Engineering, Institute of Thermal Engineering and Air Protection, Cracow University of Technology
Wszystkie publikacje autora →
Jacek Schnotale
Department of Environmental Engineering, Institute of Thermal Engineering and Air Protection, Cracow University of Technology
Wszystkie publikacje autora →

Tytuły

CFD modelling and analytical calculations of thermal transmittance
of multi-layer glazing with ultrathin internal glass partitions

Abstrakt

In recent times, there has been a demand for developing new technologies for glazing with superior thermal performance, good optical quality and of the lowest possible weight. In the paper, CFD modeling and analytical calculation of the thermal performance of multi-layer glazing with ultrathin internal glass partitions is presented.

Bibliografia

Dalal R., Naylor D., Roeleveld D., A CFD study on convection in a double glazed window with an enclosed pleated blind, Elsevier, Energy and Buildings, 41, 2009, 1256-1262.

Flaga-Maryanczyk A., Schnotale J., Radon J., Was K., Experimental measurements and CFD simulation of a ground source heat exchanger operating at a cold climate for a passive house ventilation system, Energy and Buildings, 68, 2014, 562-570.

Lechowska A., Schnotale J., Fedorczak-Cisak M., Paszkowski M., Measurement of thermal transmittance of multi-layer glazing with ultrathin internal glass partitions, Wydawnictwo Politechniki Krakowskiej, Technical Transactions, 3-B/2014, Cracow 2014, 273-280.

Vendelboe M.V., Svendsen S., Nielsen T.R., CFD modelling of 2-D heat transfer in a window construction including glazing and frame, Proceedings of the 8th Symposium on Building Physics in the Nordic Countries, Copenhagen, 16‒18 June 2008.

PN-EN ISO 12567-1, Thermal performance of windows and doors ‒ Determination of thermal transmittance by the hot-box method ‒ Part 1: Complete windows and doors, Cieplne właściwości użytkowe okien i drzwi – Określanie współczynnika przenikania ciepła metodą skrzynki grzejnej – Część I: Kompletne okna i drzwi, 2010.

PN-EN 673. Glass in building – Determination of thermal transmittance (U-value) – Calculation method, Szkło w budownictwie – Określenie współczynnika przenikania ciepła (wartość U) – Metoda obliczeniowa, 2011.

Informacje

Informacje: Czasopismo Techniczne, 2014, Budownictwo Zeszyt 3-B (8) 2014, s. 265 - 272

Typ artykułu: Oryginalny artykuł naukowy

Tytuły:

Polski:

CFD modelling and analytical calculations of thermal transmittance
of multi-layer glazing with ultrathin internal glass partitions

Angielski:

CFD modelling and analytical calculations of thermal transmittance
of multi-layer glazing with ultrathin internal glass partitions

Autorzy

Department of Environmental Engineering, Institute of Thermal Engineering and Air Protection, Cracow University of Technology

Department of Environmental Engineering, Institute of Thermal Engineering and Air Protection, Cracow University of Technology

Publikacja: 13.10.2014

Status artykułu: Otwarte __T_UNLOCK

Licencja: Żadna

Udział procentowy autorów:

Agnieszka Lechowska (Autor) - 50%
Jacek Schnotale (Autor) - 50%

Korekty artykułu:

-

Języki publikacji:

Angielski