FAQ

Effect of the numerical grid density on the modelling of fluid flow
in a stirred tank with a PMT impeller

Publication date: 10.11.2014

Technical Transactions, 2014, Chemistry Issue 2-Ch (24) 2014 , pp. 115 - 123

Authors

,
Anna Story
Institute of Chemical Engineering and Environmental Protection Processes, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology, Szczecin
All publications →
Zdzisław Jaworski
Institute of Chemical Engineering and Environmental Protection Processes, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology, Szczecin
All publications →

Titles

Effect of the numerical grid density on the modelling of fluid flow
in a stirred tank with a PMT impeller

Abstract

The paper present the results of numerical simulations performed for a stirred tank equipped with a PMT type impeller, filled up with a Newtonian fluid. The effects of the grid density and mesh quality and also of the simulation mode on the modelling of fluid flow in a stirred tank were studied. The results are compared with literature data obtained from LDA measurements. It was found that denser numerical grids give more detailed information about generated flow field near the impeller blades. Additionally, better compatibility of predicting and experimental results was obtained in the case of the transient mode simulation, what also demonstrates a significant effect of the angular position of the impeller against baffles on the generated velocity field.

References

Jaworski Z., Numeryczna mechanika płynów w inżynierii chemicznej i procesowej, Akademicka Oficyna Wydawnicza EXIT, Warszawa 2005.

Aubin J., Fletcher D.F., Xuereb C., Modelling turbulent flow In stirred tanks with CFD, Exp. Therm. Fluid Sci., vol. 28, 2004, 431-445.

Deglon D.A., Meyer C.J., CFD modeling of stirred tanks: Numerical considerations, Miner. Eng., vol. 19, 2006, 1059-1068.

Zhang Q., Yong Y., Mao Z., Yang C., Zhao C., Experimental determination and numerical simulation of mixing time in a gas – liquid stirred tank, Chem. Eng. Sci., vol. 64, 2009, 2926-2933.

Peryt-Stawiarska S., Zakrzewska B., Jaworski Z., Modelowanie CFD przepływu przejściowego płynu nienewtonowskiego w mieszalniku z turbiną Rushtona, Przemysł Chemiczny, vol. 90(9), 2011, 1664-1666.

Karcz J., Kacperski Ł., An effect of grid quality on the results of numerical simulations of the fluid flow field in an agitated vessel, 14th European Conference on Mixing, Warszawa, 10‒13 September 2012, 205-210.

Jaworski Z., Nienow A.W., LDA measurements of flow fields with hydrofoil impellers in fluids with different rheological properties, IChemE Symp. Series No. 136, 1994, 105-112.

Information

Information: Technical Transactions, 2014, Chemistry Issue 2-Ch (24) 2014 , pp. 115 - 123

Article type: Original article

Titles:

Polish:

Effect of the numerical grid density on the modelling of fluid flow
in a stirred tank with a PMT impeller

English:

Effect of the numerical grid density on the modelling of fluid flow
in a stirred tank with a PMT impeller

Authors

Institute of Chemical Engineering and Environmental Protection Processes, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology, Szczecin

Institute of Chemical Engineering and Environmental Protection Processes, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology, Szczecin

Published at: 10.11.2014

Article status: Open

Licence: None

Percentage share of authors:

Anna Story (Author) - 50%
Zdzisław Jaworski (Author) - 50%

Article corrections:

-

Publication languages:

English

View count: 1607

Number of downloads: 1226