FAQ

The influence of phase change materials on energy balance
and the risk of overheating


Data publikacji: 11.02.2015

Czasopismo Techniczne, 2014, Budownictwo Zeszyt 5-B (19) 2014 , s. 297 - 303

https://doi.org/10.4467/2353737XCT.14.373.3684

Autorzy

Anna Zastawna-Rumin
Institute of Building Materials and Structures, Faculty of Civil Engineering, Cracow University of Technology
Wszystkie publikacje autora →

Tytuły

The influence of phase change materials on energy balance
and the risk of overheating

Abstrakt

The paper presents the results of a computer simulation of a building under the assumption of the presence of a phase change material in wall elements. The influence on the cooling energy requirements and, also, the risk of overheating of the low-energy building (without HVAC systems) have been analyzed. The obtained results were compared with the ones of a low-energy building without a phase change material in walls. The comparison calculations were performed for a model of a service building located in Silesia, which is built according to an energy-efficient standard. It has a light-frame construction with light covering (external panels, heat-insulation, interior plasterboard). In the study, the presence of a 1 cm thick PCM board placed under the inner surface of plasterboard is assumed. Tests were conducted for organic materials that undergo phase transition in different temperatures, such as: 23°C, 25°C and 27°C. Based on the results of operative temperature measurements, it is possible to determine the influence of PCM on the risk of building’s overheating.

Bibliografia

Wnuk R., Magazynowanie ciepła, pozyskanego z energii promieniowania słonecznego, z wykorzystaniem materiałów fazowo-zmiennych, w budownictwie, II Konferencja SOLINA 2008, Innowacyjne Rozwiązania. Materiały i Technologie dla Budownictwa, Solina 2008, 521-528.

Muruganantham K., Application of Phase Change Material in Buildings: Field Data vs. EnergyPlus Simulation, Arizona State University, 2010.

Rodriguez-Ubinas E., Arranz Arranz B., Vega Sánchez S., González F.J., Influence of the use of PCM drywall and the fenestration in building retrofitting, Energy and Buildings 65, 2013, 464-476.

Jaworski M., Zastosowanie materiałów zmiennofazowych PCM w budownictwie, Ma- teriały budowlane, 2, 2012, 30-33.

Ostermana E., Tyagib V.V., Butala V., Rahim N.A., Stritih U., Review of PCM based cooling technologies for buildings, Energy and Buildings 49, 2012, 37-49.

Rostamizadeha M., Khanlarkhani M., Sadrameli S.M., Simulation of energy storage system with phase change material (PCM), Energy and Buildings 49, 2012, 419-422.

Jaworski M., Materiały zmiennofazowe (PCM) w budownictwie – właściwości i rodzaje, Izolacja 02/2009.

Baetensa R., Jelle B.P., Gustavsend A., Phase change materials for building applications: A state-of-the-art review, Energy and Buildings 42, 2010, 1361-1368.

Tabares-Velasco P.C., Christensen C., Bianchi M., Verification and validation of EnergyPlus phase change material model for opaque wall assemblies, Building and Environment 54, 2012, 186-196.

Evola G., Marletta L., Sicurella F., A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings, Building and Environment 59, 2013, 517-527.

Soaresa N., Costab J.J., Gasparb A.R., Santosc P., Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency, Energy and Buildings 59, 2013, 82-103.

Ibáñez M., An approach to the simulation of PCMs in building applications using TRNSYS., Appl Therm Eng, 25 (11–12), 1, 2005, 796-807.

Pedersen, CO. Advanced zone simulation in EnergyPlus: incorporation of variable properties and phase change material (PCM) capability, Building simulation, Beijing, China 2007.

Heim D, Clarke JA., Numerical modelling and thermal simulation of PCM gypsum composites with ESP-r., Energy Build, 36 (8), 2004, 795-805.

Informacje

Informacje: Czasopismo Techniczne, 2014, Budownictwo Zeszyt 5-B (19) 2014 , s. 297 - 303

Typ artykułu: Oryginalny artykuł naukowy

Tytuły:

Polski:

The influence of phase change materials on energy balance
and the risk of overheating

Angielski:

The influence of phase change materials on energy balance
and the risk of overheating


Autorzy

Institute of Building Materials and Structures, Faculty of Civil Engineering, Cracow University of Technology

Publikacja: 11.02.2015

Status artykułu: Otwarte __T_UNLOCK

Licencja: Żadna

Udział procentowy autorów:

Anna Zastawna-Rumin (Autor) - 100%

Korekty artykułu:

-

Języki publikacji:

Angielski